Fiberglass & Composite Pipe

DistributionNOW’s fiberglass pipe has a smooth interior surface that is 50% more flow efficient than equivalent metallic pipe, which reduces paraffin and scale build-up. It’s also only 25% the weight, which means rapid installation using fewer workers and minimal heavy equipment.

Learn More About Products in This Category

Fiberglass Line Pipe

Our fiberglass line pipe resists corrosion from CO₂, H₂S, and salt water. It’s ideal for low- to medium-pressure applications, transporting highly corrosive gas and produced water:

  • Flow/Emulsion Lines
  • Injection/Disposal Lines
  • Group Lines
  • Gas Gathering & Transport Lines
  • De-watering Lines
  • Water/Frac Water Transfer Lines
Read More
Read Less
Fiberglass Pipe

Specifications

Standards / Material Grades ASTM D2992 Procedure B, API 15HR, anhydride, aliphatic amine and aromatic amine cured epoxy resin
Sizes 2 in. NPS – 12 in. NPS
Pressure Rating Up to 3,500 psi, depending on size
Temperature Rating Up to 212° F (100° C)
End Connections Threaded

Downloads

TitleFile SizeDownload
TS&M Fiberglass Piping Systems Flyer - Canada 648.3 KB Download
TS&M Fiberglass Piping Systems Flyer - U.S. 363.8 KB Download

Our Suppliers

  • NOV Fiber Glass Systems (STAR™)

People also viewed

Fiberglass Spoolable Line Pipe

Our spoolable fiberglass pipe is offered on reels in continuous lengths up to 9,000 ft. (2740 m). This product provides excellent performance in a variety of applications:

  • Flow/Emulsion lines
  • Injection/Disposal lines
  • Group lines
  • Gas gathering & transport lines
  • Polymer injection/flow lines
  • De-watering lines
  • Natural gas production
  • High-pressure CO₂ and salt water injection
  • Crude oil, salt water & H₂S
  • Light chemicals (salts, solvents, pH 2-13 solutions)
Read More
Read Less
Fiberglass Spoolable Line Pipe

Specifications

Standards / Material Grades API RP 15S, CSA Z662
Construction Continuous single-angle filament wound with anhydride cured epoxy structure and exterior jacket layer
Sizes 2 in. NPS – 6 in. NPS
Pressure Rating 750 psi to 3,500 psi
Temperature Rating -29° F to 209° F (-34° C to 95° C)
End Connections Compression slip connectors

Downloads

TitleFile SizeDownload
TS&M Fiberglass Piping Systems Flyer - Canada 648.3 KB Download
TS&M Fiberglass Piping Systems Flyer - U.S. 363.8 KB Download

Our Suppliers

  • NOV Fiber Glass Systems (Fiberspar™)

People also viewed

Fiberglass Tubing & Casing

Our fiberglass products are flow-efficient, lightweight and highly corrosion resistant – perfect for your injection, production and casing string applications:

  • Disposal/Injection Tubing
  • Production Tubing (ESP, Gas Lift, Rod Pump, PCP)
  • Cement Stingers
  • Tail Strings
  • Casing Liners
  • Chemical Waste Disposal
  • Geothermal
  • Slotted Production Liners & Prepacked Screens
  • Observation Well Casing
  • Open Hole Liners
Read More
Read Less
Fiberglass Tubing

Specifications

Standards / Material Grades Anhydride, aliphatic amine and aromatic amine cured epoxy resin
Sizes 1.5 in. NPS – 9.625 in. NPS, depending on product
Lengths Joints 28 ft. – 33 ft. (8,5 m – 10,1 m), depending on product
Pressure Rating Up to 4,000 psi, depending on product
Temperature Rating Up to 212° F (100° C), depending on product
End Connections API 5B threaded, threaded & coupled, integral joint

Downloads

TitleFile SizeDownload
TS&M Fiberglass Piping Systems Flyer - Canada 648.3 KB Download
TS&M Fiberglass Piping Systems Flyer - U.S. 363.8 KB Download

Our Suppliers

  • NOV Fiber Glass Systems (Centron®)
  • NOV Fiber Glass Systems (STAR™)

People also viewed

Fiberglass Facility Piping

Our fiberglass facility piping is both flow-efficient and cost-efficient, with better chemical resistance and temperature tolerance than PVC and CPVC piping. This product works well for a wide range of applications:

  • Low-Pressure Battery & Facility Piping
  • Vapor Recovery Lines
  • Vent Lines
  • Flare Lines
  • Tank Internals
  • Water Handling (Frac, Processing, Transfer, Cooling Lines, Brine, Brackish)
  • Condensate Return
  • Industrial Wastewater
  • CO₂ Service
  • Chemical Process Piping
Read More
Read Less
Fiberglass Facility Piping

Specifications

Standards / Material Grades ASTM D2310, D2996, API 15LR, aromatic amine cured epoxy resin
Sizes 2 in. NPS – 42 in. NPS (50 mm – 1050 mm), depending on product
Lengths Up to 40 ft. (12 m) random lengths, depending on product
Pressure Rating Up to 450 psig, depending on pipe size
Temperature Rating Up to 210° F (99° C)
End Connections Taper bell & spigot, socket joint, threaded & bonded

Downloads

TitleFile SizeDownload
TS&M Fiberglass Piping Systems Flyer - Canada 648.3 KB Download
TS&M Fiberglass Piping Systems Flyer - U.S. 363.8 KB Download

Our Suppliers

  • NOV Fiber Glass Systems (Bondstrand™)
  • NOV Fiber Glass Systems (Red Thread™ HP)

People also viewed

Fiberglass Spool Fabrication

In-house fabrication of fiberglass assemblies (spools) is available upon request:

  • Risers
  • Tank internals
  • Complete VRU systems
  • Custom pup joints
  • Custom spools
Read More
Read Less
Fiberglass Spool Fabrication

Downloads

TitleFile SizeDownload
TS&M Fiberglass Piping Systems Flyer - Canada 648.3 KB Download
TS&M Fiberglass Piping Systems Flyer - U.S. 363.8 KB Download

People also viewed

Fiberglass Line Pipe Supervision Services

With over 35 years of experience selling fiberglass products, we have the technical expertise to meet your requirements. Our field supervisors have solid industry experience and are qualified by the manufacturer to provide these services:

  • Supervision of installation procedures
  • Product training certifications
  • Available 24 hours/day
Read More
Read Less
Fiberglass Pipe Supervision Service

Downloads

TitleFile SizeDownload
TS&M Fiberglass Piping Systems Flyer - Canada 648.3 KB Download
TS&M Fiberglass Piping Systems Flyer - U.S. 363.8 KB Download

People also viewed